Bitmain APW3++ mining power supply with 10 plugs

$179.00

The power cord is not included, please find one with at least 10A from your local market.

In stock

SKU: BIPS-APW310 Category: Tags: , , , ,

Description

The power cord is not included, please find one with at least 10A from your local market.

The APW3++ can deliver a maximum power of only 1200W if it is connected to a 110V mains power supply. To obtain the rated power of 1600W, the APW3++ must be connected to a 220-240V mains power supply. Please check the mains power supply that is the standard in your region before ordering.

This batch of PSU comes with only 10 PCIe connectors so cannot be used with more than one Antminer L3+ miner.

This Bitmain Power Supply was intended to be an AntMiner Power Supply and works with: AntMiner S9I, AntMiner S9 and all previous AntMiner models as well as the Avalon 841, 821 etc. It can be used as a power supply for GPU mining and will support up to 5 cards that use 2x 8 Pin Connectors for power and is one of the best power supplies for mining.

The shipping for this batch will start soon after 1st November 2017, depending on when the units are ready to ship out and your position in the order queue.

Additional information

Weight 6 lbs
Dimensions 13 x 7 x 5 in
Output - DC Voltage

12.15V

Output - Rated Current(220V input)

133A

Output - Rated Current(110V input)

100A

Output - Rated Power(220V input)

1600W

Output - Rated Power(110V input)

1200W

Output - Ripple & Noise

<1%

Output - Voltage Regulation

<2%

Output - Source Regulation

<1%

Output - Load Regulation

<1%

Output - Setup, Rise Time

<2S

Output - Power off Protection Trip Time

>9mS

Output - Interface Type

5 pairs of 6 pin PCI-E connectors (i.e. 10 connectors)

Output - Noise Level

<43DB

Input - Voltage Range

100-240V AC

Input - Starting Voltage

95-105V AC

Input - Frequency Range

47-63Hz

Input - Power Factor

>0.95 (full load)

Input - Leakage Current

<1.5mA (220V 50Hz)

Protection - Low-voltage Input

80-89V AC

Protection - Output Short Circuit

Yes

Protection - Output Overcurrent

134-185A max.

Protection - Overheat Protection

Yes

Environment Conditions - Operating Temperature

-20°C – 50°C

Environment Conditions - Operating Humidity

20% – 90% relative humidity (non-condensing)

Dimensions

220mm*108mm*62mm

Cooling Fan

Forced-air cooling

Reviews

There are no reviews yet.

Be the first to review “Bitmain APW3++ mining power supply with 10 plugs”