Out of Stock

Bitmain APW3 PSU 1600W Power Supply – Used

$179.00  /  0.00268 Ƀ

SKU: BLO-BIPS-APW310-USED Category: Tags: , , , ,

The power cord is not included, please find one with at least 10A from your local market.

  • Includes ten 6-pin PCIe connectors
  • Maximum output: 1200W @ 110v-120v, 1600W @ 220v-240v
  • Power cord not included, requires standard PC power cable (C13)
  • Click Here for Manufacturer Warranty information

Part Number / SKU: BLO-BIPS-APW310-USED

Out of stock

Join the waitlist to be emailed when this product becomes available

The power cord is not included, please find one with at least 10A from your local market.

The APW3++ can deliver a maximum power of only 1200W if it is connected to a 110V mains power supply. To obtain the rated power of 1600W, the APW3++ must be connected to a 220-240V mains power supply. Please check the mains power supply that is the standard in your region before ordering.

This batch of PSU comes with only 10 PCIe connectors so cannot be used with more than one Antminer L3+ miner.

This Bitmain Power Supply was intended to be an AntMiner Power Supply and works with: AntMiner S9I, AntMiner S9 and all previous AntMiner models as well as the Avalon 841, 821 etc. It can be used as a power supply for GPU mining and will support up to 5 cards that use 2x 8 Pin Connectors for power and is one of the best power supplies for mining.

The shipping for this batch will start soon after 1st November 2017, depending on when the units are ready to ship out and your position in the order queue.

Weight 6 lbs
Dimensions 13 × 7 × 5 in
Output - DC Voltage


Output - Rated Current(220V input)


Output - Rated Current(110V input)


Output - Rated Power(220V input)


Output - Rated Power(110V input)


Output - Ripple & Noise


Output - Voltage Regulation


Output - Source Regulation


Output - Load Regulation


Output - Setup, Rise Time


Output - Power off Protection Trip Time


Output - Interface Type

5 pairs of 6 pin PCI-E connectors (i.e. 10 connectors)

Output - Noise Level


Input - Voltage Range

100-240V AC

Input - Starting Voltage

95-105V AC

Input - Frequency Range


Input - Power Factor

>0.95 (full load)

Input - Leakage Current

<1.5mA (220V 50Hz)

Protection - Low-voltage Input

80-89V AC

Protection - Output Short Circuit


Protection - Output Overcurrent

134-185A max.

Protection - Overheat Protection


Environment Conditions - Operating Temperature

-20°C – 50°C

Environment Conditions - Operating Humidity

20% – 90% relative humidity (non-condensing)



Cooling Fan

Forced-air cooling




There are no reviews yet.

Be the first to review “Bitmain APW3 PSU 1600W Power Supply – Used”